€ 0,00
• Includes cover (Part No: TC 1279-142)
• Clips straight into joiner
• Tough, fire retardant material
• Standard joiners (Part No: TC1279-73, Telstra Part No: S 353/00788); are available separately
• Purchase by the unit
Out of stock
This connector is used to establish a right-angled intersection between two 50-mm ducts. ie. all 4 arms of the connector are connected to 50mm duct or other components using joiner (Part No: TC1279-73, Telstra Part No: S 353/00788). Joiners are available separately. NOTE: Care should be taken not to lay more than 30mm depth of pigtails or patch cords in troughing; particularly where they cross each other at right angles. This may occur with this connector
This connector is used to establish a right-angled intersection between two 50-mm ducts. ie. all 4 arms of the connector are connected to 50mm duct or other components using joiner (Part No: TC1279-73, Telstra Part No: S 353/00788). Joiners are available separately. NOTE: Care should be taken not to lay more than 30mm depth of pigtails or patch cords in troughing; particularly where they cross each other at right angles. This may occur with this connector
Our experts are happy to help you!
Chamber of Commerce: 34053476
IBAN: NL65RABO0115048936
VAT: NL005819921B01
