Description
This Kit of two items is used to mark the central hole position, using the template, on the side of the duct and using a permanent marker pen. Then using the 60mm dia hole saw with 6.3mm dia guiding drill, a 60mm dia hole is cut into the side of the duct. Into the 60mm dia hole optic fibre cord side spill outs (ie Drop – Off’s) can be fitted. These are: Straight Outlet set (Part No: TC1279‐602A) or 900 Up/Down/Left/Right Outlet set (Part No: TC1279‐609A). The spill out items are available separately. The spill outs connect to convoluted tube 44mm ID/50mm OD, that can hold up to 80 x 2mm dia optical fibre cords. The convoluted tube is available separately. Part No TC1279‐26Y – 1 metre long; Part No: TC1279‐53Y – 2 metres long or Part No: TC1279‐53Y20 – a 20 metre roll. It is recommended that a hand brace and bit style tool, rather than a power tool, be used to cut the hole if it is cut in the overhead working position. An optical fibre cord protection unit (Part No: TC1279‐50‐3 ) should be used to protect installed optical fibre cords as the 60mm dia hole is cut. This item is available separately.
